JHRG, LLC  -  Armor & High Performance Fabric Specialists
®

  Always On Guard

 

JHRG, LLC

High Performance Fabrics - Thread

&

Marine Antichafe Devices

JHRG, LLC
303 S. Pine Street
Spring Hope, NC 27882 USA
Ph: 252-478-4997 Fax: 252-478-4998
Email: info@hsarmor.com http://www.hsarmor.com

Fabric Properties and Price:

Supreme Protector 509
100 % UHMW-PE woven fabric with EVA or PE film coating

Properties

509WE

509PE

Weight

12.5 oz/yd 385g/m 12.5 oz/yd 385g/m

Width

61 inches 1560mm 61 inches 1560mm

Thickness

.020" .508mm .020" .508mm

Length

150 feet 45m 150feet 45m

Color

White black gray red White black gray red

Tensile

25.2 g/denier 25.2 g/denier

Modulus

785 g/denier 785 g/denier

Mullen Burst

1000 lb. 454kg min. 1000 lb. 454kg min.

Melt

290F 145C approx. 290F 145C approx.

Cold Crack

-40F -40C -40F -40C

Flame Resistance

FAR 25.853 (a) Appendix F, Part 1, (a), 1(iv) FAR 25.853 (a) Appendix F, Part 1, (a), 1(iv)

UV

Excellent Excellent

Abrasion

63,000 cycles Wyzenbeek 63,000 cycles Wyzenbeek

Break

Not less than 1000 lb./454kg warp and fill Not less than 1000 lb./454kg warp and fill

Trapezoid Tear

Not less than 160 lb./72kg warp and fill Not less than 160 lb./72kg warp and fill

Tongue Tear

Not less than 250 lb/114kg warp and fill Not less than 250 lb/114kg warp and fill

Chemical Resistance*

(100% strength after 6 months)

10% detergent

sea water

hydraulic fluid

gasoline

toluene

kerosene

glacial acetic acid

perchloroethylene

5% hypophosphate

29% ammonium hydroxide

(100% strength after 6 months)

10% detergent

sea water

hydraulic fluid

gasoline

toluene

kerosene

glacial acetic acid

perchloroethylene

5% hypophosphate

29% ammonium hydroxide

List Price: $80/running yard
FOB: Spring Hope, NC USA
Terms and Volume Discounts: Negotiable

*test performed on base fabric without film coating. JHRG believes
this information to be the best currently available. It is derived from
sound scientific practices, performed by textile professionals familiar
with standard testing procedures as applied to high-performance fabrics.

Recommended Applications:

Supreme Protector fabric is recommended for areas not exposed to high heat or open flame, where lightweight fabric with rip, mildew, UV, chemical and abrasion resistance is desired. Supreme Protector fabrics will not adhere with glue or RF welding. Custom weights available.

SP Thread Properties:

Style Number: SPT138 SPT92 SPT69
Fiber: UHMW-PE UHMW-PE UHMW-PE
Size: 138 92 69
Color: White White White
Putup*: spool, 1 lb. 2.2kg spool, 1 lb. 2.2kg. Spool, 1 lb. 2.2kg
Length/lb: 3726yd 3350m 5000 4500m 9000 8100m
Finish: None None None
Bond: None None or waxed None or waxed
Break: 80 lb. 36kg 50 lb. 22kg 30 lb. 14kg
Elongation: 3% 3% 3%
Cold crack: -40F/C or lower -40F/C or lower -40F/C or lower
Melt: +250F 120C +250F 120C +250F 120C
List Price: $135.00/lb. $135.00/lb. $155.00/lb.

General Characteristics:

Non-absorbent
100% wet strength after 6 months immersion in sea water
High break strength
High abrasion resistance
High UV resistance (30% strength loss after two years exposure, approx.)
High resistance to solvents, bleach and hydrocarbons

Recommended Applications:

Supreme Protector Thread is recommended for use where exposure to moisture,
abrasion, environmental contaminants or cut-hazard would be likely to cause
failure in traditional threads of equal or greater size. It is also recommended for
use as a replacement for more costly PTFE thread; for use as a lighter weight
substitute for plied or extremely heavy threads (e.g. 5 and 6 cord) requiring
specialized sewing equipment (class 7 machines); or for applications where low
stretch and/or high breaking strength are desired.

FOB: Spring Hope, NC USA
Terms and Volume Discounts: Negotiable
*Spool weight may vary + 15%.

 

JHRG Marine AntiChafe Devices

 

JHRG is a North Carolina based producer of military and civilian (law enforcement) tactical soft armor, military softgoods and laminated high performance fabrics. As a cut-and-sew final goods producer we have design and manufacturing experience with life support designated gear (anti-G suits; armor; anti-exposure suits; aviator survival vests; parachutes) and FAA certified cargo restraint devices. Much of our team’s experience has been with the fabrication of specialty, high performance fabrics.

Supreme Protector fabric was developed for longlife, high strength cargo restraint devices. The extraordinary performance of this fabric even required the development of a new sewing thread with strength and longevity to match the material.

We have combined our best thread, fabrics and professional expertise to create a new types of antichafe devices that are ideally suited to the challenging maritime environment. We believe our new fabric is a tough, cost effective means to protect docking lines and deck gear. Your applications for our gear may vary – so we simply guarantee your satisfaction with our products – 100%.

 

Antichafe Inside Diameter

 

1"

 

1 5/8"

 

2"

 

3"

 

4"

 

5"

 

6"

Sewn Tube/foot

$9.75

$10.00

$11.50

$12.50

$15.50

$17.00

$22.50

Part no. SPAC-

1

158

2

3

4

5

6

Flat Velcro Closure /foot

$6.25

N/A

N/A

N/A

N/A

N/A

N/A

Part no. SPAC-V-

1

158

2

3

4

5

6

Alligator Closure/foot

N/A

$10.75

$12.25

$14.00

$17.50

$19.00

$25.00

Part no. SPAC-AF-

1

158

2

3

4

5

6

SIZE INSTRUCTIONS: DIMENSIONS BELOW ARE ANTICHAFE INSIDE DIAMETER. Supreme Protector Antichafe Gear is priced per foot. You may order any length necessary. Sewn and flat Velcro tubes do not allow for significant adjustment; Alligator Flap closures allow ½" (+) inside diameter adjustment. It is recommended that the Antichafe tube be at least ½" larger than line diameter. If you evaluate lines by circumference, divide circumference by three to select Antichafe diameter.

 

Home  About  Chafe  Covert  Overt  Plates  Shields  NIJ Threats  GSA  Aprons  Aviation
Design  Fabric  Idea  Marine  Mars  Prices  Thread  Brochure  Links  Call