|
| |
Supreme Protector Materials Properties
100 % UHMW-PE woven fabric with film coating
|
Properties |
509WE |
512WE |
| Weight |
12.5 oz/yd
385g/m |
18.5 oz/yd
385g/m |
| Width |
61 inches 1560mm |
61 inches 1560mm |
| Thickness |
.020" .508mm |
.040" .900mm |
| Length |
150 feet 45m |
150feet 45m |
| Color |
White; black;
gray; red; royal |
White; black;
gray; red; royal |
| Tensile Strength |
25.2 g/denier |
32.2 g/denier |
| Modulus |
785 g/denier |
885 g/denier |
| Mullen Burst |
Greater than
1000 lb. 454kg min. |
Greater than
1000 lb. 454kg min. |
| Melt |
290F 145C
approx. |
290F 145C
approx. |
| Cold Crack |
-40F -40C |
-40F -40C |
| Flame Resistance |
FAR 25.853 (a)
Appendix F, Part 1, (a), 1(iv) |
FAR 25.853 (a)
Appendix F, Part 1, (a), 1(iv) |
| UV Resistance |
Excellent
|
Excellent |
| Abrasion |
63,000 cycles
Wyzenbeek |
63,000 cycles
Wyzenbeek |
| Break |
Not less than
900 lb./410kg warp and fill |
Not less than
900 lb./410kg warp and fill |
| Trapezoid Tear |
Not less than
160 lb./72kg warp and fill |
Not less than
160 lb./72kg warp and fill |
| Tongue Tear |
Not less than
250 lb/114kg warp and fill |
Not less than
250 lb/114kg warp and fill |
| Chemical Resistance* |
(100%
strength after 6 months)
10% detergent sea water
hydraulic fluid kerosene
glacial acetic acid gasoline
perchloroethylene toluene
5% hypophosphate
29% ammonium hydroxide |
(100%
strength after 6 months)
10% detergent sea water
hydraulic fluid kerosene
glacial acetic acid gasoline
perchloroethylene toluene
5% hypophosphate
29% ammonium hydroxide |
* chemical resistance tests performed on base fabric without
film coating. JHRG believes this information to be the best currently available.
It is derived from sound scientific practices, performed by textile
professionals familiar with standard testing procedures as applied to
high-performance fabrics.
Supreme Protector High Performance Thread
"Thanks for a great
product. Supreme Protector thread is durable and great to work with. It's
definitely a value added feature to all our boat tops and covers. I would
recommend it to other marine fabricators."
Will Dennett
Aurora Sails and Canvas
| Style Number: |
SPT138 |
SPT92 |
SPT69 |
| Fiber: |
UHMW-PE |
UHMW-PE |
UHMW-PE |
| Size: |
138 |
92 |
69 |
| Color: |
White |
White |
White |
| Putup: |
spool, 1 lb.
approx. |
spool, 1 lb.
approx. |
spool, 1 lb.
approx. |
| Length/lb: |
3726 |
5000 |
9000 |
| Finish: |
None |
None |
None |
| Bond: |
None |
None or waxed |
None or waxed |
| Break: |
80 lb. |
50 lb. |
30 lb. |
| Elongation: |
3% |
3% |
3% |
| Cold crack: |
-40F or lower |
-40F or lower |
-40F or lower |
| Melt: |
+250F or higher |
+250F or higher |
+250F or higher |
General Characteristics:
Color white
Non-absorbent
100% wet strength after 6 months immersion in sea water
High break strength
High abrasion resistance
High UV resistance (30% strength loss after two years exposure, approx.)
High resistance to solvents, bleach and hydrocarbons
Recommended Applications:
Supreme Protector Thread is recommended for use where
exposure to moisture, abrasion, environmental contaminants or cut-hazard would
be likely to cause failure in traditional threads of equal size. It is also
recommended for use as a replacement for more costly PTFE thread; for use as a
lighter weight substitute for plied or extremely heavy threads (e.g. 5 and 6
cord) requiring specialized sewing equipment (class 7 machines); or for
applications where low stretch and high breaking strength is a priority.
JHRG, LLC
303 S. Pine Street
Spring Hope, NC 27882 USA
Ph: 252-478-4997 or 800-849-4997
Fax: 252-478-4998
http://www.hsarmor.com
| |
|
®